PSP Go's CFW

The PSP Go's CFW Is Not Yet Released But Is On Its Way, Whenever The PSP Go's CFW Will Be Released I Will Post The Links Here & Will Also Guide You How To Install It.

Installing CFW M33-4 In PSP 1000 Or PSP 2000

To Install CFW 5.00 M33-4 We Need The Following Things:

1.                 Magic Memory Stick,

2.                 Service Mode Battery.

Magic Memory Stick:

                                    To Make A Magic Memory Stick You Must Have A Normal Memory Stick & A Computer. Download The Software “ PSP Grader 8 ”, Install It & Then Download 5.00 Official Firmware ( You Can Download It From The Software ), After All This, Attach Your Memory Stick With Your Computer And Then Select The Drive In Which You Have Inserted Your Memory Stick & Then Load Official Firmware 5.00, Then Select The Trigger As “ Left Trigger ”, Then Press The Button “ Inject IPL Only ” & After It Press The Button “ Create Pandora Stick ”. After It Your Magic Memory Stick Will Be Created.

Service Mode Battery:

                                    Pandora Battery Is Same To The Service Mode Battery But For Making The Service Mode Battery You Must Download The “ PSP Tool Version 1.00 ” Software & Then You Must Have A PSP Which Have CFW Installed, Insert Your Battery In That PSP & Then Put The PSP Tool Folder In X:/PSP/Game.

After It Run The PSP Tool Software & Then Go To “ Battery Options ” Then Select “ Convert To Service Mode Battery ” & After It Your Battery Will Be Service Mode Battery, Then Power Off That PSP Which Have CFW & Then Take The Battery Out & Then Re-Insert The Battery To Your PSP Which Does Not Have The CFW Installed And Then Power On That PSP While Holding The “ Left Trigger ”, It Will Show Up A Screen & From Their Your PSP Will Start To Install The CFW M33-4.

After Installation:

                            After CFW Installation Take Out Your Battery & Then Insert It To The PSP Which Have The CFW, Then Go To The PSP Tool,  Load It, Then Select “ Battery Options ” & Then Select “ Convert To Normal Battery ”, From There Now Power Off That PSP & Then Insert That Battery To Your PSP & Then Your PSP’s Battery Will Be Normal & Your PSP Will Have The CFW M33-4.

For You:

              Buy A Normal Battery & Make It Service Mode Battery Forever So That It Can Be Used Later.

For Any Questions, Post A Comment .

PSP Go

The PSP Go Is A Video Game Console Manufactures By Sony. It Was Released On October 1^st, 2009 In America & Europe & On November 1^st In Japan. Its New Portable Design Is Totally Different From All Other PSPs. The Sony Will Not Replace The PSP 3000 With The New PSP Go They Will Continue To Manufacture & Sell The PSP 3000 & The PSP Go Will Never Have High Selling Until The PSP Hackers Do Not Release A CFW For The New PSP Go. The Older PSP Models Support A UMD Drive, But In This New PSP Go The UMD Drive Is Not Installed But Instead Of It Sony Installed A 16GB Of Internal Flash Memory So That The PSP Go Users Can Store Their Games, Videos, Music & Other Media. PSP Go Also Supports A Memory Stick Micro (M2) Flash Card Slot Which Enables The PSP Go To Have A Total Memory Of 32GB. The New PSP Go Is 16% Lighter & 35% Smaller Than The PSP 3000. It Has A 3.8” 480x272 LCD & Also Supports Wi-Fi & Bluetooth & Is A Very Powerful Gaming Console.