To Install CFW 5.00 M33-4 We Need The Following Things:
1. Magic Memory Stick,
2. Service Mode Battery.
Magic Memory Stick:
To Make A Magic Memory Stick You Must Have A Normal Memory Stick & A Computer. Download The Software “ PSP Grader 8 ”, Install It & Then Download 5.00 Official Firmware ( You Can Download It From The Software ), After All This, Attach Your Memory Stick With Your Computer And Then Select The Drive In Which You Have Inserted Your Memory Stick & Then Load Official Firmware 5.00, Then Select The Trigger As “ Left Trigger ”, Then Press The Button “ Inject IPL Only ” & After It Press The Button “ Create Pandora Stick ”. After It Your Magic Memory Stick Will Be Created.
Service Mode Battery:
Pandora Battery Is Same To The Service Mode Battery But For Making The Service Mode Battery You Must Download The “ PSP Tool Version 1.00 ” Software & Then You Must Have A PSP Which Have CFW Installed, Insert Your Battery In That PSP & Then Put The PSP Tool Folder In X:/PSP/Game.
After It Run The PSP Tool Software & Then Go To “ Battery Options ” Then Select “ Convert To Service Mode Battery ” & After It Your Battery Will Be Service Mode Battery, Then Power Off That PSP Which Have CFW & Then Take The Battery Out & Then Re-Insert The Battery To Your PSP Which Does Not Have The CFW Installed And Then Power On That PSP While Holding The “ Left Trigger ”, It Will Show Up A Screen & From Their Your PSP Will Start To Install The CFW M33-4.
After Installation:
After CFW Installation Take Out Your Battery & Then Insert It To The PSP Which Have The CFW, Then Go To The PSP Tool, Load It, Then Select “ Battery Options ” & Then Select “ Convert To Normal Battery ”, From There Now Power Off That PSP & Then Insert That Battery To Your PSP & Then Your PSP’s Battery Will Be Normal & Your PSP Will Have The CFW M33-4.
For You:
Buy A Normal Battery & Make It Service Mode Battery Forever So That It Can Be Used Later.
For Any Questions, Post A Comment .
0 Comments:
Post a Comment
Give Your Comments Here!